Magnumforce Race Car Fabrication Home Page Products

 

1970 Hemi Cuda Subframe Connectors

Hemi Cuda Hemi Cuda front

1970 hemi cuda

Hemi Hemi Cuda Interior

Key Benefits

[Bullet] Greatly reduces torsional chassis twist in all forms of racing.
[Bullet] Becomes an integrated component of the car.
[Bullet] Low profile, won't cause ground clearance problems.
[Bullet] Offers a structurally sound location for ladder bar crossmember or tubular driveshaft safety loop when not installing a complete rear subframe.
[Bullet] Most installations run about $575 parts and labor.
Magnumforce now offers a great alternative to all of the fabrication involved with this type of connector.
Click here to see more!  Bolt in (or weld in) tubular subframe connectors.

In order for a subframe connector to function properly, it should become an integrated unit with the existing subframe and ideally have minimal bends in it and maximum weld contact area with the existing frame and floor pan.   A 2x3 example such as those installed in this Hemi Cuda welds at the front next to the torsion bar mounts and passes through the factory floor pan without affecting seat mounting points and continues through the sheet metal and into the existing rear unibody frame assembly. A subframe connector of inferior size and wall thickness as well as a connector with multiple bends in it will bend and distort excessively, nullifying any advantages that could be accrued from the installation.

1970 Hemi Cuda Subframe Connectors

 

Home     Products     Cars      News     Search     Videos    Contact

 

Join our e-mail list!


 

Contact Information

We can be reached directly by phone Monday thru Friday from 10:00 am to 5:00 pm (Pacific time) 

VISA, MasterCard, Discover, American Express, and PayPal welcome.

Ball91E5.gif (3556 bytes)Telephone - 408-559-6633

Ball91E5.gif (3556 bytes)FAX - 408-559-5283 (We do not accept unsolicited advertisements)

Ball91E5.gif (3556 bytes)Postal Address - 1436 White Oaks Rd. #7 Campbell CA. 95008 

              ACCEPTED

Send E-mail to gofast@magnumforce.com

Return Policy:  We here at Magnum Force will make every effort possible to ensure all of our customers get the correct and highest quality components with the best advice available.  In the event an item still needs to be returned please take note of these considerations.

Please call or e-mail us first for a return authorization number.  (Perhaps we can find you the correct item instead). Packages will not be delivered without this number present.

No returns on special order or custom fabricated parts. Such as, but not limited to rearend assemblies, etc.

Returns must be in as new condition in original packaging.

No returns after 30 days.  Items that have been used, installed, modified, or altered cannot be returned.  Items subject up to 30% re-boxing or re-stocking fee and shipping costs cannot be refunded.